www.ClassicTW.com http://www.classictw.com/ |
|
Quastion about Synchronet and TW2002 http://www.classictw.com/viewtopic.php?f=1&t=33091 |
Page 1 of 1 |
Author: | Stang5_0 [ Tue Mar 20, 2012 9:47 pm ] |
Post subject: | Quastion about Synchronet and TW2002 |
Hi guys, TW2002 2.20b Synch 3.15b In trying to get these two to play nicely together or at least come close, is there something other then what is posted at http://wiki.synchro.net/howto:door:tw2002 It says: SCFG Settings Name Trade Wars 2002 v3.09 Internal Code TW2002 Start-up Directory ../xtrn/tw2002 Command Line tw2002 twnode=%# Clean-up Command Line Execution Cost None Access Requirements Execution Requirements Multiple Concurrent Users Yes Intercept Standard I/O No Native (32-bit) Executable No Modify User Data No Execute on Event No BBS Drop File Type GAP DOOR.SYS Place Drop File In Node Directory Door Specific Instructions Node Settings in TEDIT.EXE / (O) BBS Node Editor (Replace # with BBS Node Number for each Node) Node number: # <A> Path to Data files : <Default Directory> <B> Path to Drop file : c:\sbbs\node#\ <C> BBS Drop file type : DOOR <D> Hardware Handshaking: Yes <E> Active Node : Yes <F> Fossil port 1 to 254: 1 <I> I/O Type : Fossil I have a feeling it is a node issue, but all the info I find seems to be outdated. Is anyone aware of something a bit more recent to help with getting the door to work? Thanks, Stang |
Author: | John Pritchett [ Tue Mar 20, 2012 11:15 pm ] |
Post subject: | Re: Quastion about Synchronet and TW2002 |
The info you're looking at is about the BBS door. TWGS is not a door. It's a TCP/IP server. To run TWGS with Synchronet, you'll need to use an outbound telnet or RLogin module and point it to TWGS, either on the same machine or a different one. RLogin is preferable because it forces your players to use their BBS name in TWGS, while a telnet connection would allow the player to enter any name when connecting to TWGS from your BBS. Other than that, it works pretty much the same way. |
Author: | Thrawn [ Tue Mar 20, 2012 11:52 pm ] | ||
Post subject: | Re: Quastion about Synchronet and TW2002 | ||
There are two ways to setup TradeWars with Synchronet (SBBS). One is to install the DOS version in the \sbbs\xtrn\twars folder. Then run TEDIT and you will need to configure *each* node you need for your BBS. So if you are running 10 nodes in SBBS and want 10 nodes in TradeWars, you need to configure each node. Remember that node 0 is "local" only, so you will need to configure nodes 1-10. In SBBS, here is the configuration you need for the first method: The second is if you want SBBS to connect to a TWGS and not the DOS version. To do that, you need the following configuration: Now notice the command line: *telgate yourdomain:yourport The command line uses the telgate command, which you will need. I've attached to this post. Place the two telgate files in your exec folder.
|
Author: | Stang5_0 [ Fri Mar 23, 2012 6:46 pm ] |
Post subject: | Re: Quastion about Synchronet and TW2002 |
Thanks you Thrawn for the suggestion. I went with option 2 and it worked. Stang |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |